China RFGATE Security Technology Co.,ltd
简体中文 | English
+86-755-83166159 Home About Us Products News Service Job Open Contact Us
Product Search:
Access Control
 TCP/IP Control Panel
 WiFi Proximity only
 RFID Card&Tag
 Electric Locks
 Access Control Parts
Card Reader
 Special Card Reader
 UHF RFID Reader
 RFID Reader Module
 Desktop Reader
Fingerprint Products
 Time Attendance
 Access Control
 USB Scanner
 Tripod Turnstile
 Swing Barrier
 Flap Barrier
 Other Barrier
  Product Name: automatic barrier gate
  Product Model: YET-P202
Specifications and product description:

Main functions:

1. The manual button can operate ‘ UP’, ‘ DOWN’ and ‘Stop’.

2. The remote control can operate ‘ UP’, ‘ DOWN’, ‘STOP’ and ‘LOCK’, ‘UNLOCK’ to the manual button.

3. It can unlock automatically when the power off, it can be taken up by hand after power failure.

4. It has the self-checking mode, convenient for maintain and adjust.

5. The vehicle detector is optional, and it has the function of ‘ take down the arm when vehicle pass’, ‘ protection from strike vehicle’ or ‘ bump barrier and take up arm automatically’.

6. The red/green light is optional.

7. The opto-isolated long cable driver is optional, it can connect with the RS232-C of the computer, with many bottom controls and conditions return commands, to make the computer control the barrier to the best.

It can add other functions according to the customers’ requirements.

Electrical characters:

1. It has the single-chip-microcomputer control for the software pitfall and hardware watchdog, never system halted.

2. It uses the magnetic induction hall device to control the system, working untouched, never wear or offset.

3. It uses the photo coupling, no contactor, zero passage via fill technology, there is no fire on the main board to disturb, so work steadily.

4. It uses the up/down over time and protection for over hot of the engine, to protect the unusual damage for the switch.

5. It use the mechanical journey switch, to control the offline.

6. It has a wide range single phase ( 160-260V ), to apply the bad environment.

7. It has opto-isolated serial communications interface, the isolated power is higher than 1500V, to make sure the safety of upper computer, to realize the high stable communication that resist the vehicle electronic spark and other interfere.
Mechanical Characters:

1. It use the precision 4-links bar to make the arm start and end slowly without any impact, and the arm operate within 90 angle without any failure.

2. It apply the precision fully automatic tracking balance system to make the locked rotor torque is zero at any position, so lessen the power and prolong the lifetime of the engine.

3. The barrier case apply the advanced water-resist system and anti-aging spray plastics handle outside, firm and never fade.



  • Lessen speed engine power: 80W
  • Power: AC220/110V +5%/-15%V
  • Length of the arm ( squared aluminum alloy or octal tube ): straight arm < = 6m, curved arm<=5m, fence arm <=4.5m
  • UP/Down speed: 3.75s, 6s, 2s ( optional ) 
  • environment temperature: -20°C~+60°C
  • Remote distance: > 20m, < 100m
  • Net weight of the barrier case: 56kg
  • Thickness of the barrier case: 2.0mm
  • Size: 340*290*1035mm
- | Site Terms | Site Map | Contact | -
Copyright © 2021 All Rights Reserved. China RFGATE Security Technology Co.,ltd . Copyright
Address:3rd floor,NO,16B building.longsheng industrial zone,Longhua District,Shenzhen Guangdong,China
TEL: 86-755-83166159   

Execution time: 109.375 Ms   Admin Login